Finally we have the solution for the rusted out trailing arms of your T25/T3/Vanagon bus, brand new, top of the art reproduction! Almost all trailing arms are rusted out in Europe. So this new units will replace your trailing arms exactly like a new part for another many years of trouble-free motoring!

1475-002 Trailing arm left T25/T3/Vanagon 05/79-08/92
OEM number: 251 501 401E

1475-003 Trailing arm right T25/T3/Vanagon 05/79-08/92
OEM number: 251 501 402E

When the nose emblem of your early Baywindow bus falls off it’s a big investment gone, VW logo’s are rare and expensive since VW thought it was smart to forbid the aftermarket to sell aftermarket logo’s anymore…..smart guys these Germans…:) So protect your precious VW logo with the right mounting cups, so simply it can’t fall off… our mounting cups are exactly as stock and fits as standard parts, exactly as original, sold each..

0440-125 Mounting cup for nose emblem all VW bus  08/67-07/72
OEM number: 211 853 615

These bushings been mount in your rear fenders, where the body is mounted to the chassis, This bushing goes through the rubber pad that sits between the body bracket and the chassis bracket, to prevent the rubber is too much pressed in between. Fits like stock! perfect reproduction!

0704-250 Bushing for shock pad body-frame, (2 pcs) for Beetle and  Karmann ghia  08/71-
OEM number: 111 799 127 x 2

The rubbers on the inlet manifold of dual port engines needs to be proper clamped to prevent false air coming through and gives you a lot of problems with idle and mileage (consumption) So we got this perfect “full circle” clamps that looks very closely like stock (for You concourse buffers…:)) and they do the job perfectly, after many years where happy we found a serious solution. This is what we use in our workshop and on our own cars…. a perfect solution!

2113 Clamps for seals on the intake manifold  13-1600cc dual port engines

Looking for a cool driver bus for a reasonable budget? This might be it, cool, nice, clean and drives like  a blast!!

CLICK PICTURE FOR MORE INFORMATION AND PICTURES

Welcome at this weeks Friday  product update, as every week we do have some serious product information about the BBT product range… don’t ask us where we get the new parts, but we dig them, or simply will find the manufacturer that will make it for us, this week no difference! 

First things first… the star of the week, after many investigations here we can present You a decent central lock assembly for your Bay window sliding door… this is the part that breaks the most on sliding doors and our used stocks been never that low as lately, so time for a new part, and one that works, this is a perfect quality part that will take away a LOT of your (sliding door) headaches…:)  will fit all years bay window buses, originally there’s two models but they’re interchangeable…

7570-005 Central door hinge mechanism for slidingdoor all Baywindow Bus  08/67-07/79

Same manufacturer as the sliding door central lock delivered us also this state of the art sliding door outside latch. This latch suffers many times from bad chrome, for the price we sell the new one, You never can re-chrome your old one. This is a fairly inexpensive top product to exact factory standards, get yours now!

7570-085 Sliding door handle – Chrome All Bay window Bus 08/73-07/79

Door buffers or centerwedges (the choice to name it is yours)are needed on VW Beetles build before August 1 1955 and VW buses because of the door lock was not that sophisticated enough to keep the door in position while driving.  These wedges really “center” your door in the right position to hold it there during the drive. BBT developed one type of wedge that will fit all models that ever used stock early style wedges. These buffers or wedges need to be replaced at EVERY restoration as they always are became too small for being “compressed” in the little notch in the door jam….Sold per pair. This will not fit 1955 and later convertibles and Ghias, they use the BBT ref 7044 wedge

0438-31 Door centerwedge, pair all beetles -07/55 – and all Bus -12/63

Did You buy that oval window as a basket case with all that parts missing? Is your old sunroof assembly just too bad or too worn for re-use? We have the perfect solution for you with this state of the kit containing EVERY single piece needed to get that ragtop sunroof working like new again! EXACTLY like standard this perfect made reproduction will fit like stock. There is NO difference between this reproduction and your original Golde brand factory sunroof.The guy that make these is a real KING of reproduction… don’t miss out….

0385-905 Complete sunroof assembly with rails Type 1 -55

This rail guides guide your sunroof cables to make the operation of your sliding roof of your bay window bus as smooth as can be. Mainly worn out (a cable operates like a chainsaw after many years of use)  or broken from heat and sunlight (thanks to many sun from the West Coast deserts of the USA that burns literally everything away) You can replace that old piece crap with our state of the art new guides for smooth and easy operation….

0392-120 Sunroof guide rail set, plastic all Bay window buses 08/67-07/79