Slowly and without notice the year ends.
This is our last News with new products for this year.

Looking back, we enlarged the BBT program significantly.
Also, this week we bring you new products to make your VW life easier.

Welcome to the BBT News

To dismantle the switches on your dashboard we now stock  this practical tool.
Will fit all switch nuts that a Volkswagen dashboard has.

6 volt or 12 volt and even on most aftermarket nuts too.
Leave the pliers in the drawers of your toolbox.

This little tool does the job, without damaging the nut.

1161-000 Key for dash switch mounting nut

Bay window owners beware!

Behind the handle of your emergency brake BBT # 0523-100 belongs a rubber buffer that protects the plastic guide from cracking BBT # 0523-103
Many times missing, cracked, totally faded or completely worn out.

We tooled up and have a brand-new solution for you.
We simply bring you back this buffer!

Available from our stocks, order yours now.

0523-102 Buffer emergency brake handle – Combi 08/67-07/79

We already had the transmission gasket set for Bus 68-75, as BBT # 1415-650

Now we add two new gasket sets to cover all manual transmissions for Type 1, Type 2 and T25/T3/Vanagon.
These kits include all paper gaskets and O-rings, but not the flange seals, sealing caps or shift shaft seal.

Our total range of transmission gasket sets you find HERE

1415-660 Gasket kit transmission – Bus 08/75-07/82

1415-670 Gasket kit transmission – Bus 08/82-07/92

We used to sell these washers in stainless steel.
Stainless steel not being the correct material for tension washers we now changed to mild steel.

With this combination you get back a stock application.
The serious price reduction is part of this change!

Check out our quantity pricing.

1347-210 Washer for front axle mounting – Bus 03/55-07/67

With the tooling written off we lowered the price on these superb grills for your bay window.
Especially for the early Bay the price reduction is a good one.

These grills have been produced exclusively for BBT in Germany on our private tooling.
Beware for cheaper reproductions.

Same time we lowered our pricing on the plastic insect grills behind the steel grills HERE

0891-980 Front grill – Bus 08/72-07/79 BBT

0891-985 Front grill – Bus 08/67-07/72 BBT

 After a short time being unavailable we found a new source and are happy to stock them for you again.

1269-510 Clip for brake line on chassis – Bus 04/79-07/92

1248-090 Brake caliper left – Bus 08/70-07/72
1249-090 Brake caliper right – Bus 08/70-07/72

1829 Oil cooler double port engine – Type1

1829-4 Oil cooler – Type 4

The BBT news team wishes you a wonderful weekend and a full force new work week!

Why an old Volkswagen, you ask?
Well, they may not have high-tech bells and whistles.

But they have character.
Something we all crave.

Even more than an air conditioner on a bloody hot day.
So, get in that rusty beetle or hippie bus and drive it around happily.

Turn a smile on people’s faces wherever you go.
Something we can use more than ever in these weird times.

To keep your icon on the road BBT brings you more and better parts.
Every week, over and over again.

Welcome to BBT News.

We decided it was time for more accurate splash pans for that splittie bus.
We bring you splash pans that do fit better for the different model years.

There was a ton minor differences over the years.
But most we could streamline into two models.

We have the 55-89 model to cover the early buses.
Most work we put in to the 60-66 model.

For the one year only 1967 model or with a dual circuit brake master cylinder you need a sleeve where the brake light switch peaks out.

The sleeve is quite easy to make.
There for we do not grave an extra part nr for it for now.

This is a proud addition to our Silver Weld Through program.

0890-705 Splash pan – Bus 03/55-07/59 SWT
0890-706 Splash pan – Bus 08/59-07/67 SWT

Out of deep in the world of VW engine builders we a had the request to add the Maxi 26 Full Flow Oil Pumps.
Maxi 26 In & Out Full Flow Oil Pumps provide a way to operate your engine “Full Flow” without the inconvenience and cost of drilling and tapping your engine case.

Maxi 26 In & Out Full Flow Oil Pumps are manufactured with large 3/8″ inlet and outlets for unrestricted, high volume oil flow.
The aluminum alloy used in manufacturing the housing matches the temperature characteristics of the engine case to help reduce leaks and oil loss.

Keyed 9 tooth 26mm drive gear and blueprinted specs help provide an oil system that will greatly reduce oil temperature and increase engine life.

The Maxi 26 In & Out 6061 T-6 billet cover is anodized in black, CNC engraved, and will accept 3/8″ NPT fittings HERE

Our other Maxi Flow oilpumps you find found HERE

1808-101 Oil pump Full Flow Maxi 26 – Type1 -> ’70 (black)

Back in stock after too long time.
Our new production gas caps for early Bay and 181/Thing are available now.

We opted for a less gloss but improved the lock (a lot).
We advise to grease the lock before use for trouble free and long-term operation.

Order yours now.

0491-475 Fuel cap with lock – Bus 08/67-07/71, Typ181 BBT

0491-476 Fuel cap seal – Bus 08/67-07/71, Type 181 BBT

The BBT News team wish you a wonderful weekend.
Drive that VW making smiles for miles.

Seems fall is over in Western Europe.
First freezing cold is a fact.

Hopefully, the freezing takes the rain away for a while.
We, at BBT, do not take anything away…..

….we bring you our product updates and new arrivals.
Just like any other week.

Welcome to the BBT News

Split window beetles have a different type of molding, dull nerved aluminum that is only polished, not anodized as later models.

The profile of these moldings requires a specific clip.
Not available anymore since decades we bring them back.

The clip is close to the later model but has flat foots where sliding into the molding.
Made from a special spring steel it holds the molding by tension.

After rejection of the first production, we are proud to say these are now exactly as we wanted them and exactly as they should be.

Reversed engineered from a handful NOS ones that BBT Bob found on one of his trips.

Clips for later model wide molding you find HERE
Split window beetle molding kits HERE

0406-100 Molding clip – Beetle -09/52 BBT

We decided to put some more cool parts from our NOS warehouse online.
We start today with these absolute NOS cylinder heads for 1200cc engines.

Only one limited lot.
First come, first served.

Once they are gone, they do not come back.

1721-1 Cylinder head 1200cc – NOS

Endless patience we need sometimes till factories make what we want them to make.
Staying friendly and polite all the time, do not loose the communication, keep the file open.

If you are persistent enough you will win often.
Factories always crack, but sometimes it takes so much longer as it should.

We got these correct hinge bolts back in stock. correct bolts. previous production was too short, before were rubbish.

Now they are perfect, exactly as original.
Used in following applications on your bus.

Cab door hinge 08/67-01/76 (ch -216-2126 631)
Tailgate hinge 08/67-07/79
Striker plate cab door 08/67-07/79
Striker plate tail gate 08/71-07/79
Striker plate sliding door 08/67-07/79
Lower sliding door roller bracket 08/67-07/79

Sold each.

8050-101 Allen key bolt doorhinge / lock catch – Bus 08/66-07/79

1263-100 Brake hose front – SuperBeetle BBT

0362-1 Seal window sash – Beetle, Bus 08/67-07/92, Type3

7412 Vent wing flap seal – Bus-07/67 (pair)

0276 Stopplate Brake/clutch pedal – Beetle/KG 08/57-, Type3, Type181

0521-010 Emergency brake handle kit – Beetle/KG 01/65-, Type3 02/65- Type181 Chrome
0521-110 Emergency brake handle kit – Beetle/KG 01/65-, Type3 02/65- Type181 black

BBT News team wishes you a cold but cozy weekend.
Keep you warm while you work on your Volkswagen.