Latest news | BBT - Top quality aircooled VW parts

11 juni 2021 - NEW

Summertime and summer weather, that’s what we call the good season…
Vaccination in Europe goes full force up, all Covid numbers down.

Joe Biden, the president of the USA, travels through Europe, to enforce partnership.
And here is your favorite BBT News on Friday….

What more could man wish ?

The generator/alternator strap was longer time a problem when we needed one for our own cars.
Totally unhappy with the existing reproduction, we decided it was time to tool up for our own production.

We made them exactly as original, in 1mm thick band steel, pre-formed them for a perfect fit around the generator stand and finished them off with strong 8.8 nut and bolt.
Simply said, they’re at least as good as original VW generator straps, if not better.

We supply both sizes, 90mm & 105mm for either 6 or 12 volt generators & alternators.

Another BBT reproduction we’re proud of!

1931-090 Generator strap 90mm
1931-105 Generator strap 105mm

We supply our clutch bearing guide longer time already under BBT #1521-1

We now add the same clutch release bearing guide, but in a higher quality.

One of the features we like to highlight on this top quality product is the little oil drain hole. In case the transmission starts leaking, this hole lets the oil out in the bell housing of your transmission in order not to spoil it over your clutch.

Sold each

1521-150 Release bearing guide TQ

As we sell quite a lot of CB Performance “Panchito heads” we feel it as normal to supply also the specific intake gasket between inlet manifold and the cylinder head.

Panchito 044 heads are our prefered choice for mild to wild street tuning.

2131-300 Intake gasket ‘Panchito 044’ – Type1 double port (pair)

Next we like to introduce this small necessity.
We supply the specific rubber strap BBT # 0737 to hold the back of your rear seat in position while driving, especially while breaking.

Now we add the little metal clamp plate that will hold the rubber strap firmly in place.
Comes with original type of screw, for perfect look and perfect finish.

Other rear seat back rest hardware can be found HERE

0737-005 mounting clamp hold down strap rear seat – Beetle 1200, 13/1500 -07/67, KG coupé, KG Cabrio -06/67, Type181

Let’s talk valve train for 25/30 HP engines (36Hp SAE for our American friends) .
To keep your rockers in place there’s a larger spring between the two inner rockers.

We made this spring as it was not available yet.
Proudly Made in Belgium. Check out our quantity discount pricing!

All hardware for 25/30 HP rockers (36Hp SAE for our American friends) can be found HERE

1782-105 Spring for rocker arm shaft 25/30hp (1piece)

Mahle, ZF TRW Varga, and many more came in this week, not full deliveries unfortunately as manufacturers still fight raw materials, but at least we had some supplied and we’re happy we can solve now some of the backorders …. some of the longer backorders we highlight here below.

1619-025 Rod bearings .25