Ever listened to upbeat music while wrenching VW's?
We bet you did. 

Upbeat music and VWs come along with each other very well. 
Good parts come along with your beloved VW too.

Let us take care for that.
Every week more and better.

Welcome to the BBT NEWS.
Let the fresh air in. 
Easy to control UNI-VENT style ventilation system for your split window bus. 

Mounts directly in your standard roof mounted fresh airbox, no adjusting needed.
Re-use original screws, super easy. 

Works so much better than overpriced ambulance fans at a fraction of the price.
Watch the video for correct installation.

Did we give you idea's for a cool X-Mass or New Years present?
TRW/Varga quits production.
Even we begged really hard, no mercy.

We had to start our own venture. 
We made a good master cylinder for a bargain price.
 
Proudly presented in a BBT box,
so you can be sure from the quality.

TOP Quality brand FTE HERE.
T25/T3/Vanagon owners this one is for you. 
This is the ring that holds your gascap.

Bolted through your body with two more rings holding the (in)famous rubber elbow in between. 
All T25/T3/Vanagon fuel filler neck parts HERE
T25/T3/Vanagon Syncro models have the gas tank in the rear.
Hence they have a separate filler system.

This is the big black plastic fuel filler neck holder.
The rubber and filler hose for syncro only HERE

Syncro only!
Besides ATE VW fitted also Girling brake calipers on VW buses from 1975 up to 1986.
In between there are even two different models Girling brake calipers used.

However, no information is found which years or models used which model.
The difference is mostly easy to see in the diameter of the mounting pins. 

Mounting kits with 4,5mm pins have been already longer available HERE
Now we add the mounting kits with 6mm pins.

Measure the diameter of your pins before ordering. 
This is for Girling brake calipers on 75-86 only!
This rubber sits between your lens and your ring.
For upright headlights that is. 

We upgraded this rubber to what it should be. 
We molded out of one piece to fit smoothly over your headlight glass.

We now offer the perfect fit with a big price cut. 
Seal around lens for sloping headlight HERE
We upgraded our 31/34 PICT-4 carburetor rebuild kits.
We worked with the same factory as our 28PCI rebuild kits HERE

Tested thoroughly before production. 
Huge price reduction and check out our sharp quantity discounts.
Tune that stereo out loud, happy wrenching!

Reply to Thread

Comments (0)


This thread has been closed from taking new comments.
# views: 379
Category: NEW
Author: Peter Loos
Back to overview

Subscribe

* indicates required
don't click this link