Because of a small technical issue this BBT news published first in Dutch language.

We adjust hereby and publish here the proper English version.

We are extremely sorry for the inconvenience caused. 

Bay window sliding door sill scuff plates are now available.
Extremely high quality, made in extruded aluminum.

Originally on Deluxe buses 08/73- (ch.nr 214 200 001-) but will fit any bay window sliding door sill.
We do have for left-side or right-side sliding door, or for both if you have a double door off course.

7570-200 Trim sliding door sill left – Bus 08/67-07/79
7570-201 Trim sliding door sill right – Bus 08/67-07/79

It was long times since we offered early fuel pumps new.
When we first got the new reproduction from the Italian factory we returned because it did not meet our requirements.

Factory listened carefully to our comments and adjusted what had to be done.
We evaluated the new prototypes made to our remarks.

We tested over 5000km on road trips on our own VW’s.
Happy with the results, we offer now to the public.

This pump has connections for 6mm fuel lines, you find HERE.
Bakelite base for the early pump you find HERE.

1685-030 Fuel pump (6mm) 25/30hp (Din) TQ

0658-02 Cigaret lighter 6/12 Volt Ivory

0780-050 Headliner vents -Beetle 08/70-07/71 white (pair)

BBT News team excuse again for the wrongly language at launch, we will work hard to never let happen again…:)

NATO/OTAN top in Vilnius showed a united Europe.
Nothing is nicer as being united.

Love peace and understanding.
The hippies taught us in the sixties already.

They preached it, using VW buses going everywhere.
Respect for the VW bus, no other car united so many people as the VW bus.

No new Bus parts today.
But we do have other goodies available now in our ever-growing stock range.

Welcome to BBT news.

Besides our high-quality pop out locks for your early beetle, HERE, we got these ECO versions rather by coincidence.
Our Eco version comes complete with the hinge part that sits on the aluminum frame.

Finished with a nice ivory button.
Our complete range of Pop Out locks or latches you find

0347-106 Popout window latch complete, left – Beetle -07/64 (ivory) ECO
0347-107 Popout window latch complete, right – Beetle -07/64 (ivory) ECO

This inspection cover goes in the back of your spare wheel to close the two inspection holes that give access to your steering box.
There is two holes, to serve LHD & RHD cars alike.

Fits all German build Beetles 08/60 and up.
Will not fit reproduction and Brazilian beetles with square holes.

The plug for the front panel is HERE.

0883-050 Inspection cover steeringbox sparewheel well – Beetle/KG 08/60- (not for 1302/03), Type 181

Finally late model T1 chassis kits in stock.
This kit contains all you need to (let) weld a complete brand-new chassis for your beloved splittie bus.

Are you still feeling safe driving around with half rusted out chassis beams.
Did you patch up your chassis?

Volkswagen says you could not weld on chassis beams to respect the structure in the material.

BBT also supply a jig to weld a complete split window bus chassis together HERE.
Chassis kit for early model T1 bus HERE.

0890-703-1 Chassis Kit (Boxed) – Bus 08/59-07/67 SWT

Our SWT jacking points came back in massive quantities.
Simply the best on the market.
All our T 1 jacking points HERE

0890-53 Jacking point rear – Bus -07/67 SWT

0890-872 Roof gutter right (cargo door) – Bus 03/55-07/63 SWT
0890-873 Roof gutter left (cargo door) – Bus 03/55-07/63 SWT

BBT News team wish you a nice united weekend.

Working on our own cars  is always inspiring.

Our 1957 Karmann Ghia Low light has a 356 engine since the sixties.
During rebuild and dyno testing we decided to control fuel supply as it should.

More than happy with the results we decided to commercialize our set up.
Fuel pressure regulating should be standard on any engine with dual carburation.

We always start the idea that fuel today is extremely poor in quality.
A 100% correct fuel supply is mandatory for a perfect carburation with poor fuel.

A correct fuel supply is necessary for a smooth-running engine.
We digged high and low in our aim for a best possible set up.

Today we present you the results of that research.
All components we use on our own engines are now available  through our dealer network.

Welcome to the BBT News.

1689-105 Fuel pressure regulator adjustable ”Filter King’
1689-200 Fuel pressure gauge / manometre 0-1bar (0-14psi) ‘Filter King’
1689-210 Adapter fuel pressure gauge to regulator ‘Filter King’
1689-215 Adapter fuel pressure gauge “in-line” for 8mm line ‘Filter King’
1689-220 Blanking plug adapter fuel pressure gauge ‘Filter King’
1689-225 Fuel line fitting 8mm ‘Filter King’

Dual carburetor set ups require correct fuel pressure, for best results.
Especially original configurations like old speed and Porsche 356 engines need a correct fuel pressure to perform flawlessly.
Also every Volkswagen boxer engine with Solex, Weber or Dell’Orto dual carburetor set up require fuel pressure control for perfect results.
Even carbureted Porsche 911 engines can benefit from a correct adjusted fuel pressure.

Correct fuel pressure makes your engine runs smoother, consume less, idle better and breath more happy.
Good fuel pressure regulators also prevent extensive needle pin wear in your carburetors.
Needle pins are adjuster needles, not shutter valves!
Too much fuel pressure will always give problems, one way or another, or mostly all possible ways together!
BBT’s reliable Dyno man only work with King fuel pressure regulators (without filter) for the best results. He tested many…

Our BBT # 1689-105 fuel pressure regulator is especially set up for applications with dual carbureted aspirated engines.

Some specs;

Compatible with alcoholed fuel (E85)
Diameter 67 mm
1 x INLET port,1/8″ NPT
1 x OUTLET port,1/8″ NPT
Supplied with bracket and bolts for easy fitting
For carburetor applications only.
Not suitable for high pressure injection pumps/system

Most dual carbureted cars from the BBT collection use BBT # 1689-105 fuel pressure regulator set up with BBT # 1689-200 fuel gauge, a BBT # 1689-210 T-connector
bolted directly to the fuel pressure regulator and 2 BBT # 1689-225 8mm fuel line pilots with 1/8 NPT tread all bolted together.
We recommend a BBT # 1689-220 blank plug to replace fuel pressure gauge for long drives. KING factory recommends fuel pressure gauges for setting pressure ONLY.

We recommend strongly to place a serious fuel filter BEFORE the fuel pressure set up.
A fuel filter after the fuel pressure regulator set up can cause serious pressure falls.

We have negative experiences with fuel pressure regulators with incorporated fuel filters.
Hence we do strongly recommend for separate units.

Install the fuel pressure regulator AFTER your fuel filter.
Keep your VW breath happily!

High and low, deep, and deeper.
We searched the world for our most popular BBT clip.

No factory was able to supply for a fair price after Covid anymore…
Rising energy cost and inflation given to us as main reasons for extensive price rises.

Never happy we decided to “dive” in clips technology and start our own production.
After design, set up and testing we are happy to show our results.

We supply a clip that says a nice “clack” to your molding at mounting.
Also, it holds your molding firm to the body of your car.

We produced extreme massive quantities to get good pricing.
Resulting in a nice clip for a correct cost.

Nicely packed in bags of 50pcs makes this an easy wholesale product.
Check our quantity pricing!

0407 Molding clip – Beetle, Type3 08/66-

1368-1 Steering box 1302/1303 -74

0709-1 Engine compartment seal – Beetle, KG -07/65, Bus -07/71 German

1254-310 Brakeline kit – Bus 08/69-07/70

0139 Engine lid (model ’66) – Beetle 08/64-07/66

1340 Front axle adjuster -07/64

The BBT news team wishes you a wonderful weekend!