We add a new set of brake shoes to our Brake shoe line.
Brakes shoes for beetles before 1954 have a straight connection to the adjusting screws. 

Brake shoes 54-57 HERE do contact their adjusting screws under an angle. 
This makes pre 54 brake shoes the same top and bottom. 

At the same time, we made new tooling, so the brake lining spans your complete brake shoe. 
This gives extra Brake lining surface to your brake drum. 

Increasing your brake power as we speak! 
Brake adjusting screws and cogwheels HERE

Lens only for T25/T3/Vanagon license light lens only.
Comes with its rubber. 

Will not fit Pick-up models
Sold each.

Now available!
Repair parts for bay window rain gutters.

If it is too bad we offer also the complete roof for your bay window HERE

Inspection covers for steering box in your beetle spare wheel well now available. 
Other inspection covers are available HERE

Brazilian bay window owners this one is for you! 
Rebuild kit for Brazilian Bay window emergency brake handle mechanism. 

Brazilian Bay window and German build bay window emergency brake system have a different pull bar! 
European Emergency brake handle mechanism parts HERE

Sold to us as NOS 1200CC (That's 40HP SAE for our American friends) 
In real they are 30 DIN HP (36 SAE to our American friends) 

So now available NOS connecting rods for 30DIN HP engines!

Last week we received another couple of containers out of all drections worldwide.
Solving many nasty back orders, and yes still more to come.
Many more.

Wintertime is project time. 
Finish your project use the good parts! 

BBT NEWS TEAM wish you a happy (VW) weekend!

Let the fresh air in. 
Easy to control UNI-VENT style ventilation system for your split window bus. 

Mounts directly in your standard roof mounted fresh airbox, no adjusting needed.
Re-use original screws, super easy. 

Works so much better than overpriced ambulance fans at a fraction of the price.
Watch the video for correct installation.

Did we give you idea's for a cool X-Mass or New Years present?

TRW/Varga quits production.
Even we begged really hard, no mercy.

We had to start our own venture. 
We made a good master cylinder for a bargain price.
 
Proudly presented in a BBT box,
so you can be sure from the quality.

TOP Quality brand FTE HERE.

T25/T3/Vanagon owners this one is for you. 
This is the ring that holds your gascap.

Bolted through your body with two more rings holding the (in)famous rubber elbow in between. 
All T25/T3/Vanagon fuel filler neck parts HERE

T25/T3/Vanagon Syncro models have the gas tank in the rear.
Hence they have a separate filler system.

This is the big black plastic fuel filler neck holder.
The rubber and filler hose for syncro only HERE

Syncro only!

Besides ATE VW fitted also Girling brake calipers on VW buses from 1975 up to 1986.
In between there are even two different models Girling brake calipers used.

However, no information is found which years or models used which model.
The difference is mostly easy to see in the diameter of the mounting pins. 

Mounting kits with 4,5mm pins have been already longer available HERE
Now we add the mounting kits with 6mm pins.

Measure the diameter of your pins before ordering. 
This is for Girling brake calipers on 75-86 only!

This rubber sits between your lens and your ring.
For upright headlights that is. 

We upgraded this rubber to what it should be. 
We molded out of one piece to fit smoothly over your headlight glass.

We now offer the perfect fit with a big price cut. 
Seal around lens for sloping headlight HERE

We upgraded our 31/34 PICT-4 carburetor rebuild kits.
We worked with the same factory as our 28PCI rebuild kits HERE

Tested thoroughly before production. 
Huge price reduction and check out our sharp quantity discounts.

Tune that stereo out loud, happy wrenching!

For several years we work on our BBT brake drum line.
Today we proudly launch two new applications.

Developed with greatest precision.
Cast iron is assessed for 27 different chemical elements during the melting and casting process.

NOS stub axles modelled for our two-meter-long brand-new spline tool.
Extreme quality control in every step of the process.

BBT brake drums can easily be considered as Original Equipment.
They do not come any better.

Made in Brazil.
All BBT brake drums HERE

Out of a canceled special order we now offer bus side panels without louvres/air vents.
Right side comes with the gas flap hole though.

Economically priced what makes it a good solution if you only want to change your side partially.
Perfect to create your own fantasy (camping)trailer, food truck or decoration.

Regular bus side panels HERE

A broken suspension stop holder is no longer reason to discard your IRS trailing arm.
We're happy to offer now a perfect repair stud.

Originally welded our repair stud bolts for easy installation.
Or can be welded for perfection.

Our correct 60mm suspension stop HERE

Type 4 alternator ring now available.
This seal made from hard-plastic is a necessity to mount the alternator properly on your Type 4 engine. 

Rubber air flow elbows for Type 4 alternators HERE

Normal hardware we add to our product lines, we don't publish on our weekly news letter.
Except when it's a special one.
This bolt tightens your swing liver to your front axle on T1 & T2 buses.
Often neglected this bolt is a very important part of your steering system.
Originally 8.8 we decided 10.9 is a better standard.
You don't want your steering to be wrong.

Being the mounting kit only for the brake pedal before, we now add  necessary hardware for your clutch pedal too.

Hardware for brake and clutch pedal together just seemed logic to us.

BBT NEWS team wishes you a very nice weekend with lots of (inside) VW fun.